DT-300N v2/A4

eXtreme Power 11n 2.4GHz 2×2 Access Point with Router (1000mW)

CERIO’s DT-300N v2/A4 eXtreme Power 11n 2.4Ghz 2×2 High Power Wireless Access Point with built-in 10dBi patch antennas and also supports broadband wireless routing. DT-300N v2/A4 wireless High Power design enhances the range and stability of the device’s wireless signal in office and home environments. Another key hardware function of DT-300N v2/A4 is its PoE Bridging feature, which allows subsequent devices to be powered through DT-300N v2/A4 LAN port. This reduces device cabling and allows for more convenient deployment.

Specification

Introduction

CERIO DT-300N v2/A4 eXtreme Power 11n 2.4Ghz 2×2 High Power Wireless Access Point with built-in 10dBi patch antennas and also supports broadband wireless routing. DT-300N v2/A4 wireless High Power design enhances the range and stability of the device’s wireless signal in office and home environments. Another key hardware function of DT-300N v2/A4 is its PoE Bridging feature, which allows subsequent devices to be powered through DT-300N v2/A4LAN port. This reduces device cabling and allows for more convenient deployment.

DT-300N v2/A4 utilizes a 533Mhz high power CPU base with 11n 2×2 transmission rates of 300Mbps. This powerful device can produce high level performance across multiple rooms or large spaces such as offices, schools, businesses and residential areas. DT-300N v2/A4 is suitable for both indoor and outdoor deployment, and utilizes an IPX6 weatherproof housing.

The DT-300N v2/A4 hardware equipped with to bundles Cerio CenOS 5.0 Software Core. CenOS 5.0 devices can use integrated management functions of Control Access Point (CAP Mode) to manage an AP network.

Highlight Features

  • 2.4Ghz band supports standard 802.11 bgn protocol with maximum data transfer rate of 300Mbps
  • 1000mW at 2.4Ghz Output eXtreme High Power
  • 2×2 Built in +10dBi , 2.4GHz (H110, E60) Directional Panel Antenna
  • Supports CenOS 5.0 Software (Click here for more)
  • Operation Modes : Access Point Mode (includes Hotspot Portal Authentication, Pure AP Mode, and AP + WDS Mode), Control Access Point Mode (Centralized AP Management), Router AP Mode, Client Bridge + Repeater Mode, and WISP / CPE Repeater Mode
  • IEE802.3af/at compliant Passive PoE Design
  • Supports PoE Bridge function to allow power to be passed on to subsequent 802.3af/at PoE devices
  • Provide customizable login and logout Captive portal page by Web Page
  • Weather-proof Housing (IPX6 Rated)
  • Each Virtual ESSID supports 10 local built-in local accounts, And supports external RADIUS server, and  

OAuth2.0 Facebook / Google account

  • CenOS5.0 Control Access Point Mode (CAP) supports centralized management of up to 16 AP devices
  • Supports at total of 8 Multiple-ESSIDs
  • Supports x8 WDS Links

Software Features

  • CAP Mode Group management –maintain a set of setting templates that simplify the task of assigning the same setting to multiple APs
  • Supports up to 8 ESSIDS
  • Each SSID supports 802.1q VLAN Tag standards, supporting up to 4096 group VLAN Tag capability
  • QoS(Quality of Service) for bandwidth management and traffic prioritization and supports network
  • Users Upload/Download Bandwidth Control speed limits, and User Device (Total) bandwidth control. Administrators can regulate the 3limit of each network user
  • Supports 11f IAPP and IEEE802.11r and IEEE802.11k Fast Roaming
  • Support Ping Watchdog function, which automatically monitoring device operations and reboots the device before a crash can occur
  • Software UI supports Auto reboot setting function. Software setting allows automatically reboot by Daily/Weekly/Monthly settings
  • Supports CenOS 5.0 built-in Control Access Point Mode (Controller-less Wireless LAN), and CenOS 5.0 compatible management platforms
  • Administrative Access : Supports CLI access via Telnet and SSH

 

Application Software Cerio CenOS 5.0 Software Core
Standards & Hardware Specifications
Network Standards Conformance IEEE 802.11 b/g/n compliant

IEEE 802.3 / IEEE 802.3u

IEEE802.11i Preauth (PMKSA Cache)

IEEE802.11d Multi Country Roaming

IEEE 802.11Q VLAN

IEEE802.11r

IEEE802.11k Fast Roaming

IEEE802.11f

IEEE802.11e WMM

Ethernet Configuration 10/100BASE-TX Auto MDI/MDI-X Ethernet Connector x 2
LED Indicators PWR  (Power)  LED x1

WLAN LED x1

ETH1  (PoE In)  LED x1

ETH2  (PoE Bridge)  LED x1

Wireless Specifications
Data Transfer Rate IEEE802.11b : 1 / 2 / 5.5 / 11Mbps (auto sensing)

IEEE801.11g : 6/ 9/ 12/ 18/ 24/ 36/ 48/ 54Mbps

IEEE802.11n: 300Mbps (at 40MHz), 150Mbps (at 20MHz)

Frequency Range IEEE802.11nbg :

2.412 ~ 2.462GHz (USA)

2.412 ~ 2.484GHz (Japan)

2.412 ~ 2.472GHz (Europe ETSI)

2.457 ~ 2.462 GHz (Spain)

2.457 ~ 2.472 GHz (France)

Channel Spacing IEEE802.11b/g/n : 20/40MHz
Media Access Protocol CSMA / CA with ACK
Modulation Method IEEE802.11b:DSSS (DBPK,DQPSK,CCK)

IEEE802.11g/n:OFDM(64-QAM,16-QAM,QPSK,BPSK)

Operating Channels 802.11b/g/n :
11 for FCC,14 for Japan,13 for Europe, 2 for Spain, 4 for France
Transmit Power Variation 2.4Ghz :  Max : 30 ± 2 dBm
Receiver Sensitivity 2.4Ghz :  Max : -97 dBm
Environmental & Mechanical Characteristics
Operating Temperature -25 °C ~ 70 °C
Storage Temperature 30 °C ~ 80°C
Operating Humidity 100% Non-Condensing
Storage Humidity 100% Non-Condensing
Antenna Built-in 10dBi Dual Polarization Directional Antenna  (H : 110, E : 60)
Form Factor Supports Wall and Pole Mounting, Plastic Weatherproof housing design
System Power Consumption 9Watt (Max)
Power Supply Fast Ethernet PoE Injector Switching Power Supply

Supports Power over Ethernet (48V/0.5A) Input

(PoE Power Injector) AC Input : 110-240V

Input Power 12V~68V VDC Wide Range
Dimensions ( W x H x D ) 59*115*194 mm
Unit Weight 302g
Certifications CE, FCC, NCC, BSMI, ROHS Compliant

 

Package Contents
DT-300N A4 Main Unit  x1
RJ-45 UTP Cable  x1
Power Adapter (Power Supply)  x1
PoE Adapter  x1
Wall Mounting Kit  x1
Self-Locking Cable Ties for Pole Mounting  x2
CD Manual  x1
Quick Installation Guide  x1
Warranty Card  x1

Hardware Features

  • Built in +10dBi , 2.4GHz (H110, E60) Directional Panel Antenna
  • Waterproof IPX6 Rating
  • Weatherproof RJ45 Connectors
  • Supports PoE Bridge function to allow power to be passed on to subsequent 802.3af/at PoE devices
  • Integrates a long-range power amplifier and high sensitivity receiver to deliver unmatched reliability and performance at large coverage application
  • Built-in lightning arrester (15kV ESD)
  • Supports Hardware chipset base Watch Time Dog, allowing the OS to reboot automatically before a crash

Hardware Overview

DT-300N v2/A4

 

PoE Power Over Ethernet Bridge Application

Mounting Application

Pole Mount Wall Mount Wall Mount

 Specification

Version Published Date Language File Size Download
v3.0b 2016.07.25 English 2MB

QIG Download

Version Published Date Language File Size Download
v2.0a 2016.02.22 English 2.29MB

QSG Download

Version Published Date Language File Size Download
v1.0a 2016.02.22 English 1.45MB

User Manual

Version Published Date Language File Size Download
Bundle CenOS3.0 2016.05.03 English 3.02MB
Bundle CenOS4.0 2016.05.03 English 1.74MB
Bundle CenOS5.0 2016.11.09 English 4.95MB

Introduction Guide Download

Version Published Date Language File Size Download
Bundle CenOS3.0 2016.05.26 English 1.85MB
Bundle CenOS4.0 2016.05.26 English 3.96MB
Bundle CenOS5.0 2016.10.11 English 2.05MB

Cerio CWMS- Centralized APs management software Introduction Guide ( Only for CenOS3.0 Software System )

Version Published Date Language File Size Download
CWMS 2015.07.20 English 157

Firmware Download

Version Published Date Language File Size Download
CenOS3.0 / v1.1.12 2017.10.23 English / Chines 5.77MB
CenOS4.0 / v4.0.17 2016.06.27 English / Chines 5.54MB
CenOS5.0 / v1.0.5 2017.10.23 English / Chines 6.12MB

Different software core generations (e.g. CenOS 3.0 / 4.0 / 5.0) support different software functionality. Please enter the device’s software user interface and “Reset to Factory Default” before attempting to upgrade to different generation software cores.

Notes:

1. To prevent data loss during firmware upgrade, please back up current settings before proceeding

2. Do not interrupt during firmware upgrade including power on/off as this may damage system.

3. For better firmware upgrade reliability, use a direct ethernet connection instead of Wi-Fi.