Want create site? With Free visual composer you can do it easy.
IW-100GX-N
1
eXtreme Power 11n 2.4Ghz 1×1 In Wall PoE Access Point( 800mW )
1

IW-100GX-N eXtreme Power 11n 2.4Ghz 1×1 In Wall PoE Access Point is an easy-to-install and cost-effective solution for most of indoor wireless deployments. The high class access point is perfect for application in areas such as: hotels, offices, and Luxurious houses.

Specification Sheet

IW-100GX-N eXtreme Power 11n 2.4Ghz 1×1 In Wall PoE Access Point is an easy-to-install and cost-effective solution for most of indoor wireless deployments. The high class access point is perfect for application in areas such as: hotels, offices, and Luxurious houses. The IW-100GX-N effectively works to extend the range and increase the performance of a wireless network. The IW-100GX-N provides a RJ-45 wired connection as well as both Wi-Fi wireless connection and RJ11 Pass-through functionality. The 100GX-N hardware equipped with to bundles Cerio CenOS 3.0 Software Core and support Cerio Wireless Management Software (CWMS), a network administrator can centrally manage the IW-100GX-N via a Web browser and SNMP MIB browser & VLAN tag. Included PoE, power and data are supplied to the unit using CAT5 Ethernet cable. It can be powered via PoE switch or PoE Injector when available. The Ethernet port supports Link-On and Cable Length Power Saving and Link-Down Power Saving when PoE is not available. The IW-100GX-N Structure (Form Factor) with bundle US or EU type faceplate is set to support In wall Mounting make up and installation.

The Software Built-in: CenOS 3.0 Introduction
CERIO’s GS Firmware uses the CenOS 3.0 core . The firmware’s main functions are Wifi application for Router + WiFi Access Point ( Includes Router AP+WDS) and Pure WiFi Access Point (Includes AP+WDS) and Point to Point / Multi Point WiFi Bridge and Bridge + Repeater Extension WiFi AP and WISP/CPE for Router + WiFi Repeater AP functions . The CenOS 3.0 core’s operational mode supports Router AP with WDS mode / Pure AP with WDS Mode / Pure WDS mode / Client Bridge + Universal Repeater Mode and WISP/CPE Repeater +AP mode. The CenOS 3.0 features that simplify deployment and reduce cost for continued maintenance of the indoor Access Point . The Cerio CenOS is undoubtedly your wifi application best choice.

IW-100GX-N CenOS 3.0 Software key Features

  • Operation Modes : Router AP Mode, Pure AP+WDS Mode, Pure WDS Mode, Client Bridge Universal Repeater Mode, WISP Repeater + AP Mode
  • Supports 8 Multiple-BSSID. And Support IEEE802.11f IAPP
  • Maximum Security with 802.1X, WAP, and WPA2
  • Integragted IEEE 802.3af Power over Ethernet (PoE).
  • Max WDS Link x 8 (Wireless Distribution Service) for Pure WDS Bridge
  • Bundles Wireless RF Signal Enable and Disable by time scheduling function to auto reboot function .
  • Enable and Disable to control blinking of the devices LED lights
  • Supports IEEE802.1d Spanning Tree
  • Integragted IGMP v1/v2/v3 snooping functions and Support Web management
  • IEEE 802.1Q Tag VLAN priority control  and SNMP v1/v2c/v3 , SNMP Traps Supported
  • Ping Watchdog function support
  • Support Hardware chipset base Watch Time Dog , The OS will be reboot by automatically before crash.
  • Software UI support Auto reboot setting function , Can by Hour/Daily/Weekly to setting software Auto reboot
  • Auto Channel Scan and support Scan other AP site survey Single information
  • Bundles Cerio CenOS3.0 software Core interface allows for communicating with Cerio Wireless Management Software (CWMS) and CERIO AM-Series AP Management WLAN Switch or Access Controller hardware device of network management servers.
  • Provide Traffic Monitor and Graphical GUI Status Interface.

IW-100GX-N CenOS 3.0 Software Specifications

Wireless Feature

  • Supports IEEE802.11n,HT Tx/Rx Stream selection : 1 for 150Mbps(Tx),and 150Mbps(Rx) Transmission power control :  Layer 1~9
  • Channel selection : Manual or Auto
  • IEEE802.11f IAPP : to facilitate faster roaming for the stations among different APs nearby
  • No of associated clients per AP : 32
  • Supports 8 virtual BSSID and associated clients per AP to 32 and the Pure WDS Max. 8
  • IEEE 802.11d -Multi country roaming
  • IEEE802.1Q VLAN tag support
  • IEEE 802.11e WMM QoS ,COS , Diffserv / TOS

Authentication/Encryption (Wireless Security)

  • WEP 64/128/152 bit /EAP-TLS + Dynamic WEP , EAP-TTLS + Dynamic WEP, PEAP/MSPEAP + Dynamic WEP
  • PA-PSK/TKIP,WPA-802.1x/TKIP, 802.11i WPA2-PSK/CCMP/AES 128/256bit, WPA2 (802.1x /CCMP / AES 128/256bit ), No. of registered RADIUS servers : 1
  • Setting for TKIP/CCMP/AES 128/256bit (ASCII 63 & HEX 64 )key’s refreshing period WPA2-PSK/CCMP/AES, WPA2(802.1x /CCMP / AES)
  • Hidden SSID broadcast support
  • Access Control list (ACL) by MAC and IP Address

Quality of Service

  • IEEE802.11e WMM
  • IGMP Snooping V3 Support
  • DiffServ/TOS , COS, IEEE 802.1Q Tag VLAN priority control

Management

  • On line client status monitoring
  • Real time traffic monitor and status reporting supported
  • Web-Based management interface, Intuitive Web Management Interface
  • Supports Firmware Upgrade via Web , Reset to Factory Defaults
  • Supports SNMP v1/v2c/v3 , MIB II
  • SNMP Traps to a List of IP Address
  • Supports Event log and Administrative Access : HTTP and HTTPS/SSL,SSH and supports CLI access via Telnet Management

IVLAN Tag / SNMP v2c/v3 and Web Based Management interface

Besides supporting IEEE 802.1Q Tag VLAN priority control, the users can also easily handle network management and maintenance tasks through this unit. The browser interface permits users to monitor node conditions, link quality, manage traffic flow, and view event logs of the IW-100GX-N units. The web based management interface also allows Network administrators to easily configure, update, and monitor every IW-100GX-N station. SNMP private MIBs are available for advanced users that prefer to manage devices through their own network manager.

The Software Bundle: CenOS 4.0 Introduction

CERIO’s NGS Firmware uses the CenOS4.0 core. The firmware’s main functions are web login authentication and Thin Access Point (TAP) modes. CERIO’s CenOS 4.0 Access Point uses hotspot technology importing concepts. Main functions include authentication login support remote RADIUS Server, local user account, OAuth2.0 account and guest login in AAP mode.

Cerio’s (Thin AP) wireless base station TAP function supports only GUI state monitor displays when acting as a Thin Access Point. Once this setting is operational, the device ends all NGS centralized control and management functions and operates strictly under the control and management of other supervising systems such as an AP utilizing CAP (Controller Access Point) mode. The thin AP deployment architecture acts to effectively improve network efficiency, and reduce security concerns of information theft from wired/wireless invades. Because no settings are stored in a Thin AP, device theft or invader intrusion would pose no threat to the networks security.

Controller Access Point (CAP)- AP manager Administrators should use CAP mode to simultaneously managed APs of AAP and TAP mode. Centralized APs management enables control of Wi-Fi function / security / users authentication / firmware upgrade / system time / traffic monitoring / and system information. TAP mode supports GUI status monitoring, allowing administrators to facilitate audit APs. CERIO’s NGS Firmware also supports load balance management through TAP mode (Real-time user limitation).

The firmware provides Traffic Monitoring and Graphical GUI Status Interface. Administrators can easily monitor system statuses and network traffic for each AP.

IW-100GX-N CenOS 4.0 Software key Features

  • Operation Modes : (AAP) Authorization AP Mode, (TAP) Thin AP Mode, (CAP) Control AP Mode
  • Provide customizable login and logout portal page by Web Page
  • Supports local built-in local accounts, external RADIUS server, and OAuth2.0 Facebook / Google accounts
  • Provides customizable Login redirect URL and Login URL web links
  • Supports wireless IGMP the v1/v2/v3 function, may pass on in the wire the immediate video and music wrapped gift
  • Supports Control AP Group Management, Supports up to 16 access points
  • Centralized Control Management of Wired and Wireless Devices in CAP Control AP
  • AP Group Management- maintain a set of setting templates that simplify the task of assigning the same settings to multiple Aps
  • Multi Language SSID and 8 Multiple-ESSID support , And Support IEEE802.11f IAPP
  • QoS(Quality of Service) for bandwidth management and traffic prioritization and supports network Users Upload/Download Bandwidth Control speed limits, and User Device (Total) bandwidth control. Administrators can regulate the maximum Bandwidth Upload/Download speed limit of each network user
  • Auto Channel Scan and support Scan other AP site survey Single information
  • Support Hardware chipset base Watch Time Dog , The OS will be reboot by automatically before crash
  • Software UI support Auto reboot setting function , Can by Hour/Daily/Weekly to setting software Auto Reboot
  • Bundles Cerio CenOS 4.0 software Core interface allows for communicating with Cerio Wireless NGS CAP ( CAP Mode ) AP Management system or NGS-1000 X86 base Access Controller hardware device of network management servers
  • Enable and Disable to control blinking of the devices LED lights
  • SupportsIEEE802.1d Spanning Tree
  • Support HTTP/HTTPS , CLI via Telnet and the SSH interface
  • Provides Traffic Monitor and Graphical GUI Status Interface

    IW-100GX-N CenOS 4.0 Operation Mode Applications

    IW-100GX-N eXtreme Power 11n 2.4Ghz 1×1 In Wall PoE Access Point with CenOS 4.0 software supports three operational modes: the (AAP) Authentication AP Mode/(TAP) Thin AP Mode/(CAP) Control AP Mode. It utilizes built-in remote management features that simplify deployment and reduce costs of continued maintenance of the WiFi hotspot Access Point.

    (AAP) Authentication AP Mode
    The WiFi Authentication Supports Web Login through RADIUS Servers / Local Account / OAuth2.0

    IW-100GX-N CenOS 4.0 Operation Mode Applications

    IW-100GX-N eXtreme Power 11n 2.4Ghz 1×1 In Wall PoE Access Point with CenOS 4.0 software supports three operational modes: the (AAP) Authentication AP Mode/(TAP) Thin AP Mode/(CAP) Control AP Mode. It utilizes built-in remote management features that simplify deployment and reduce costs of continued maintenance of the WiFi hotspot Access Point.

    (AAP) Authentication AP Mode

    The WiFi Authentication Supports Web Login through RADIUS Servers / Local Account / OAuth2.0

    (TAP) Thin AP Mode

    Use CenOS 4.0 CAP Mode to Control devices utilizing TAP mode

    (CAP) Control AP Mode

    CAP Mode allows for Simultaneous Management of APs operating in AAP and TAP Mode

    W-100GX-N CenOS 4.0 Software Specifications

    Support Wireless Access Controller

    CERIO CenOS 4.0 Access Point provides authentication and authorization for a wireless networks. Administrator can select CAP (Control Access Point) mode to centralize management of network APs.

    Centralized APs Management of CAP Mode

    • AP Group management –maintain a set of setting templates that simplify the task to assign the same setting to multiple APs
    • AP-Automatic configuration and provisioning by CAP mode
    • Locally maintained configuration profiles for managed APs
    • Auto discovery managed APs for TAP/AAP mode
    • Central firmware Upgrade-Select multiple APs and upgrade their firmware at the same time
    • Remote Firmware upgrade by TFTP and HTTP

IW-100GX-N Hardware Key Features

  • 800mW at 2.4Ghz Output eXtreme High Power
  • IEEE 802.11n 1Tx / 1Rx Design, Bandwidth of up to 150Mbps(Tx), 150Mbps(Rx) link rate
  • Integragted IEEE 802.3af Power over Ethernet (PoE) in this device.
  • Ethernet RJ45 x 2 port connector and Phone RJ11 x2 port design

IW-100GX-N Hardware Application

In Wall Mounting Application

Desk Mounting Application

IW-100GX-N Hardware Specifications 
Application Software 
OS System Compatible edition Cerio CenOS 3.0 and Cerio CenOS 4.0 Software Core
Specifications
Standards Conformance IEEE 802.11 b/g/n compliant 
IEEE 802.3 / IEEE 802.3u 
IEEE 802.3af Power over Ethernet
IEEE 802.11i Preauth (PMKSA Cache ) 
IEEE 802.11d Multi country roaming
IEEE 802.1Q Tag VLAN
IEEE802.11f  IAPP
IEEE802.11e WMM
Ethernet Configuration 10/100BASE-TX Auto MDI/MDI-X RJ-45 Ethernet * 2
(Power over Ethernet 802.3.af PoE in )
Telephone Configuration RJ-11 Pass Through  In x1 connector , Out x1 connector
LED Indicators ( Power / Network Access ) LED x 1
Wireless Specifications
Data Transfer Rate IEEE802.11b : 1 / 2 / 5.5 / 11Mbps (auto sensing) 
IEEE801.11g : 6/ 9/ 12/ 18/ 24/ 36/ 48/ 54Mbps 
IEEE802.11n  : 150Mbps (Tx), 150Mbps (Rx)
Frequency Range 2.412 ~ 2.462GHz (USA)
2.412 ~ 2.484GHz (Japan) 
2.412 ~ 2.472GHz (Europe ETSI)
2.457 ~ 2.462 GHz (Spain)
2.457 ~ 2.472 GHz (France)
Channel Spacing IEEE802.11b/g/n : 20/40MHz
Media Access Protocol CSMA / CA with ACK
Modulation Method IEEE 802.11b: DSSS (DBPK,DQPSK,CCK)
IEEE 802.11g/n: OFDM (64-QAM,16-QAM,QPSK,BPSK)
Operating Channels IEEE 802.11b/g/n: 
Transmit Power Variation Max : 29 ± 1 dBm
Receiver Sensitivity Max : -96dBm 
Environmental & Mechanical Characteristics
Operating Temperature -25 °C ~ 55 °C   
Storage Temperature -25 °C ~ 65 °C
Operating Humidity 10% to 80% Non-Condensing
Storage Humidity 5% to 90% Non-Condensing
Antenna Build in 1x1 Smart Omni Directional Antenna
Form Factor In Wall Faceplate : 
for US Type and EU Type In Wall 
Stand Bracket : 
for Stand / Wall Mounting / Ceiling Mounting
System Power Consumption 8 Watt Max.  
Input Power Require 803.3af 48V PoE Ethernet Interface Power In
Dimensions ( W x H x D ) Main Unit : 52 x 76.2 x 35mm 
Faceplate Set :  70 x120x10 mm(US-Type )
Faceplate Set :  86 x 88 x10 mm(EU-Type )
Stand/Mounting Bracket : 64 x 85.5 x 54 mm
Unit Weight Main Unit 72.5g , US-Faceplate 26g , EU-Faceplate 21.5g , Stand/Mounting Bracket 23.5g  
Certifications CE, FCC, NCC, BSMI, ROHS Compliant

Size of In wall : measured in mm

Main Unit with US-Type Faceplate For US / Japan Specification

 

Main Unit with EU-Type Faceplate For Europe / China Specification

Package Content
100GX-N Main Unit x1
RJ-45 UTP Cable x1
In Wall Faceplate Set - 1  (U.S.A Specification) x1
In Wall Faceplate Set - 2  (Europe Specification) x1
Wall Mounting Bracket Set x1
CD Manual x1
Quick Installation Guide x1
Warranty Card x1
 Specification
 Version  Published Date  Language  File Size  Download
 Bundle CenOS 3.0/4.0 Spec Sheet  2015.01.31  English  1.91MB
 QIG Download
 Version  Published Date  Language  File Size  Download
 v1.0a  2013.09.02  English  1.18MB
 QSG Download
 Version  Published Date  Language  File Size  Download
 v2.0a  2016.06.29  English  770KB
User Manual
 Version  Published Date  Language  File Size  Download
 Bundle CenOS3.0  2016.06.29  English  2.34MB
 Bundle CenOS4.0  2016.06.29  English  2.53MB
 Bundle CenOS5.0  2016.11.09  English  4.95MB
 Introduction Guide Download
 Version  Published Date  Language  File Size  Download
 Bundle CenOS3.0  2015.03.03  English  1.86MB
 Bundle CenOS4.0  2015.04.23  English 5.81MB
 Bundle CenOS5.0  2015.10.11  English  2.25MB
 Cerio CWMS- Centralized APs management software Introduction Guide ( Only for CenOS3.0 Software System )
 Version  Published Date  Language  File Size  Download
 CWMS
 2015.07.20  English  1.10MB
 Firmware Download
 Version  Published Date  Language  File Size  Download
 CenOS3.0 / v1.0.18  2014.12.04  English / Chines  5.07MB
 CenOS4.0 / v4.0.1  2015.10.19  English / Chines  5.45MB
 CenOS5.0 / v0.0.1  N/A  English / Chines  N/A  N/A
Different software core generations (e.g. CenOS 3.0 / 4.0 / 5.0) support different software functionality. Please enter the device’s software user interface and “Reset to Factory Default” before attempting to upgrade to different generation software cores.

 Notes:

 1. To prevent data loss during firmware upgrade, please back up current settings before proceeding

 2. Do not interrupt during firmware upgrade including power on/off as this may damage system.

 3. For better firmware upgrade reliability, use a direct ethernet connection instead of Wi-Fi.

Did you find apk for android? You can find new Free Android Games and apps.