WP-300N - Cerio Corporation
WP-300N
eXtreme Power 11n 2.4Ghz 2×2 Wall-Plate PoE Access Point ( 500mW )

CERIO’s WP-300N eXtreme Power 11n 2.4Ghz 2×2 Wall-Plate PoE Access Point bundles Cerio’s CenOS 3.0 Software core and supports Cerio Wireless Management Software (CWMS), enabling connection to Wireless Indoor Networks for service providers deploying last mile services to education facilities, hospitality businesses (hotels/resorts), and luxury homes. Network administrators can create and centrally manage multiple subscriber service tiers using per-subscriber rate limiting features. The WP-300N Structure (Form Factor) supports both Wall-Plate installation and Wall Mounting.

Specification Sheet

CERIO’s WP-300N eXtreme Power 11n 2.4Ghz 2×2 Wall-Plate PoE Access Point bundles Cerio’s CenOS 3.0 Software core and supports Cerio Wireless Management Software (CWMS), enabling connection to Wireless Indoor Networks for service providers deploying last mile services to education facilities, hospitality businesses (hotels/resorts), and luxury homes. Network administrators can create and centrally manage multiple subscriber service tiers using per-subscriber rate limiting features. The WP-300N Structure (Form Factor) supports both Wall-Plate installation and Wall Mounting.

The WP-300N eXtreme Power 11n 2.4Ghz 2×2 Wall-Plate PoE Access Point hardware utilizes 500mW eXtreme power and built-in 2.4 GHz 2×2 Omni directional antennas. WP-300N’s design makes it the ideal solution for inconspicuous and high performance deployment. Cerio’s WP-300N provides in-room connectivity for a variety of environments such as hotels, resorts, universities, and luxurious homes. WP-300N focuses on customers looking for a modern and aesthetically appealing way to improve their network. Strategic placement of WP-300N can replace unaesthetic RJ-45 wall ports and add a sense of modernism to a room or hallway.

The WP-300N can provide subscribers with an Ethernet connection for a local access to extend the range and increase the performance of a wireless network. The WP-300N hardware also includes 802.3af/at PoE capabilities that allows power and data to be supplied to the unit using CAT5 Ethernet cable. A USB port located on the side of the device allows users to conveniently charge devices through a USB Charger. Finally, when deployed in public places such as hotels and university campuses, WP-300N’s ensures product safety from theft through its wall-plate design.

The Software Built-in: CenOS 3.0 Introduction
CERIO’s GS Firmware uses the CenOS 3.0 core . The firmware’s main functions are Wifi application for Router + WiFi Access Point ( Includes Router AP+WDS) and Pure WiFi Access Point (Includes AP+WDS) and Point to Point / Multi Point WiFi Bridge and Bridge + Repeater Extension WiFi AP and WISP/CPE for Router + WiFi Repeater AP functions . The CenOS 3.0 core’s operational mode supports Router AP with WDS mode / Pure AP with WDS Mode / Pure WDS mode / Client Bridge + Universal Repeater Mode and WISP/CPE Repeater +AP mode. The CenOS 3.0 features that simplify deployment and reduce cost for continued maintenance of the indoor Access Point . The Cerio CenOS is undoubtedly your wifi application best choice.

IW-100GX-N CenOS 3.0 Software key Features

  • Operation Modes : Router AP Mode, Pure AP+WDS Mode, Pure WDS Mode, Client Bridge Universal Repeater Mode, WISP Repeater + AP Mode
  • Supports 8 Multiple-BSSID. And Support IEEE802.11f IAPP
  • Maximum Security with 802.1X, WAP, and WPA2
  • Integragted IEEE 802.3af Power over Ethernet (PoE).
  • Max WDS Link x 8 (Wireless Distribution Service) for Pure WDS Bridge
  • Bundles Wireless RF Signal Enable and Disable by time scheduling function to auto reboot function .
  • Enable and Disable to control blinking of the devices LED lights
  • Supports IEEE802.1d Spanning Tree
  • Integragted IGMP v1/v2/v3 snooping functions and Support Web management
  • IEEE 802.1Q Tag VLAN priority control  and SNMP v1/v2c/v3 , SNMP Traps Supported
  • Ping Watchdog function support
  • Support Hardware chipset base Watch Time Dog , The OS will be reboot by automatically before crash.
  • Software UI support Auto reboot setting function , Can by Hour/Daily/Weekly to setting software Auto reboot
  • Auto Channel Scan and support Scan other AP site survey Single information
  • Bundles Cerio CenOS3.0 software Core interface allows for communicating with Cerio Wireless Management Software (CWMS) and CERIO AM-Series AP Management WLAN Switch or Access Controller hardware device of network management servers.
  • Provide Traffic Monitor and Graphical GUI Status Interface.

IW-100GX-N CenOS 3.0 Software Specifications

Wireless Feature

  • Supports IEEE802.11n,HT Tx/Rx Stream selection : 1 for 150Mbps(Tx),and 150Mbps(Rx) Transmission power control :  Layer 1~9
  • Channel selection : Manual or Auto
  • IEEE802.11f IAPP : to facilitate faster roaming for the stations among different APs nearby
  • No of associated clients per AP : 32
  • Supports 8 virtual BSSID and associated clients per AP to 32 and the Pure WDS Max. 8
  • IEEE 802.11d -Multi country roaming
  • IEEE802.1Q VLAN tag support
  • IEEE 802.11e WMM QoS ,COS , Diffserv / TOS

Authentication/Encryption (Wireless Security)

  • WEP 64/128/152 bit /EAP-TLS + Dynamic WEP , EAP-TTLS + Dynamic WEP, PEAP/MSPEAP + Dynamic WEP
  • PA-PSK/TKIP,WPA-802.1x/TKIP, 802.11i WPA2-PSK/CCMP/AES 128/256bit, WPA2 (802.1x /CCMP / AES 128/256bit ), No. of registered RADIUS servers : 1
  • Setting for TKIP/CCMP/AES 128/256bit (ASCII 63 & HEX 64 )key’s refreshing period WPA2-PSK/CCMP/AES, WPA2(802.1x /CCMP / AES)
  • Hidden SSID broadcast support
  • Access Control list (ACL) by MAC and IP Address

Quality of Service

  • IEEE802.11e WMM
  • IGMP Snooping V3 Support
  • DiffServ/TOS , COS, IEEE 802.1Q Tag VLAN priority control

Management

  • On line client status monitoring
  • Real time traffic monitor and status reporting supported
  • Web-Based management interface, Intuitive Web Management Interface
  • Supports Firmware Upgrade via Web , Reset to Factory Defaults
  • Supports SNMP v1/v2c/v3 , MIB II
  • SNMP Traps to a List of IP Address
  • Supports Event log and Administrative Access : HTTP and HTTPS/SSL,SSH and supports CLI access via Telnet Management

IVLAN Tag / SNMP v2c/v3 and Web Based Management interface

Besides supporting IEEE 802.1Q Tag VLAN priority control, the users can also easily handle network management and maintenance tasks through this unit. The browser interface permits users to monitor node conditions, link quality, manage traffic flow, and view event logs of the IW-100GX-N units. The web based management interface also allows Network administrators to easily configure, update, and monitor every IW-100GX-N station. SNMP private MIBs are available for advanced users that prefer to manage devices through their own network manager.

The Software Bundle: CenOS 4.0 Introduction

CERIO’s NGS Firmware uses the CenOS4.0 core. The firmware’s main functions are web login authentication and Thin Access Point (TAP) modes. CERIO’s CenOS 4.0 Access Point uses hotspot technology importing concepts. Main functions include authentication login support remote RADIUS Server, local user account, OAuth2.0 account and guest login in AAP mode.

Cerio’s (Thin AP) wireless base station TAP function supports only GUI state monitor displays when acting as a Thin Access Point. Once this setting is operational, the device ends all NGS centralized control and management functions and operates strictly under the control and management of other supervising systems such as an AP utilizing CAP (Controller Access Point) mode. The thin AP deployment architecture acts to effectively improve network efficiency, and reduce security concerns of information theft from wired/wireless invades. Because no settings are stored in a Thin AP, device theft or invader intrusion would pose no threat to the networks security.

Controller Access Point (CAP)- AP manager Administrators should use CAP mode to simultaneously managed APs of AAP and TAP mode. Centralized APs management enables control of Wi-Fi function / security / users authentication / firmware upgrade / system time / traffic monitoring / and system information. TAP mode supports GUI status monitoring, allowing administrators to facilitate audit APs. CERIO’s NGS Firmware also supports load balance management through TAP mode (Real-time user limitation).

The firmware provides Traffic Monitoring and Graphical GUI Status Interface. Administrators can easily monitor system statuses and network traffic for each AP.

IW-100GX-N CenOS 4.0 Software key Features

  • Operation Modes : (AAP) Authorization AP Mode, (TAP) Thin AP Mode, (CAP) Control AP Mode
  • Provide customizable login and logout portal page by Web Page
  • Supports local built-in local accounts, external RADIUS server, and OAuth2.0 Facebook / Google accounts
  • Provides customizable Login redirect URL and Login URL web links
  • Supports wireless IGMP the v1/v2/v3 function, may pass on in the wire the immediate video and music wrapped gift
  • Supports Control AP Group Management, Supports up to 16 access points
  • Centralized Control Management of Wired and Wireless Devices in CAP Control AP
  • AP Group Management- maintain a set of setting templates that simplify the task of assigning the same settings to multiple Aps
  • Multi Language SSID and 8 Multiple-ESSID support , And Support IEEE802.11f IAPP
  • QoS(Quality of Service) for bandwidth management and traffic prioritization and supports network Users Upload/Download Bandwidth Control speed limits, and User Device (Total) bandwidth control. Administrators can regulate the maximum Bandwidth Upload/Download speed limit of each network user
  • Auto Channel Scan and support Scan other AP site survey Single information
  • Support Hardware chipset base Watch Time Dog , The OS will be reboot by automatically before crash
  • Software UI support Auto reboot setting function , Can by Hour/Daily/Weekly to setting software Auto Reboot
  • Bundles Cerio CenOS 4.0 software Core interface allows for communicating with Cerio Wireless NGS CAP ( CAP Mode ) AP Management system or NGS-1000 X86 base Access Controller hardware device of network management servers
  • Enable and Disable to control blinking of the devices LED lights
  • SupportsIEEE802.1d Spanning Tree
  • Support HTTP/HTTPS , CLI via Telnet and the SSH interface
  • Provides Traffic Monitor and Graphical GUI Status Interface

    IW-100GX-N CenOS 4.0 Operation Mode Applications

    IW-100GX-N eXtreme Power 11n 2.4Ghz 1×1 In Wall PoE Access Point with CenOS 4.0 software supports three operational modes: the (AAP) Authentication AP Mode/(TAP) Thin AP Mode/(CAP) Control AP Mode. It utilizes built-in remote management features that simplify deployment and reduce costs of continued maintenance of the WiFi hotspot Access Point.

    (AAP) Authentication AP Mode
    The WiFi Authentication Supports Web Login through RADIUS Servers / Local Account / OAuth2.0

    IW-100GX-N CenOS 4.0 Operation Mode Applications

    IW-100GX-N eXtreme Power 11n 2.4Ghz 1×1 In Wall PoE Access Point with CenOS 4.0 software supports three operational modes: the (AAP) Authentication AP Mode/(TAP) Thin AP Mode/(CAP) Control AP Mode. It utilizes built-in remote management features that simplify deployment and reduce costs of continued maintenance of the WiFi hotspot Access Point.

    (AAP) Authentication AP Mode

    The WiFi Authentication Supports Web Login through RADIUS Servers / Local Account / OAuth2.0

    (TAP) Thin AP Mode

    Use CenOS 4.0 CAP Mode to Control devices utilizing TAP mode

    (CAP) Control AP Mode

    CAP Mode allows for Simultaneous Management of APs operating in AAP and TAP Mode

    W-100GX-N CenOS 4.0 Software Specifications

    Support Wireless Access Controller

    CERIO CenOS 4.0 Access Point provides authentication and authorization for a wireless networks. Administrator can select CAP (Control Access Point) mode to centralize management of network APs.

    Centralized APs Management of CAP Mode

    • AP Group management –maintain a set of setting templates that simplify the task to assign the same setting to multiple APs
    • AP-Automatic configuration and provisioning by CAP mode
    • Locally maintained configuration profiles for managed APs
    • Auto discovery managed APs for TAP/AAP mode
    • Central firmware Upgrade-Select multiple APs and upgrade their firmware at the same time
    • Remote Firmware upgrade by TFTP and HTTP

Specification

Version Published Date Language File Size Download
Supports CenOS3.0 / 4.0 2015.09.01 English 2.47MB

QIG Download

Version Published Date Language File Size Download
v1.0a 2015.07.20 English 2.17MB

QSG Download

Version Published Date Language File Size Download
v1.0b 2015.07.20 English 1MB

User Manual

Version Published Date Language File Size Download
Bundle CenOS3.0 2015.07.20 English 3.12MB
Bundle CenOS4.0 2016.02.01 English 1.75MB
Bundle CenOS5.0 2016.11.09 English 4.95MB

Introduction Guide Download

Version Published Date Language File Size Download
Bundle CenOS3.0 2015.07.20 English 2.97MB
Bundle CenOS4.0 2015.08.25 English 4.81MB
Bundle CenOS5.0 2015.10.11 English 3.22MB
 

Cerio CWMS- Centralized APs management software Introduction Guide ( Only for CenOS3.0 Software System )

Version Published Date Language File Size Download
CWMS 2015.07.20 English 157MB

Firmware Download

Version Published Date Language File Size Download
CenOS3.0 / v1.0.4 2017.10.23 English / Chines 5.19MB
CenOS4.0 / v4.0.1 2015.10.19 English / Chines 5.54MB
CenOS5.0 /v1.0.5 2017.10.23 English / Chines 6.11MB

Different software core generations (e.g. CenOS 3.0 / 4.0 / 5.0) support different software functionality. Please enter the device’s software user interface and “Reset to Factory Default” before attempting to upgrade to different generation software cores.

Notes:

1. To prevent data loss during firmware upgrade, please back up current settings before proceeding

2. Do not interrupt during firmware upgrade including power on/off as this may damage system.

3. For better firmware upgrade reliability, use a direct ethernet connection instead of Wi-Fi.