All for Joomla All for Webmasters
Want create site? With Free visual composer you can do it easy.

OW-400-A2

eXtreme Power AC1200 2.4GHz/5GHz 2×2 +17dBi +Heater Outdoor Bridge/AP (800mW)

CERIO’s OW-400-A2 eXtreme Power AC1200 2.4GHz/5GHz 2×2 +17dBi +Heater Outdoor Bridge/AP (800mW) is a dual band outdoor AP that combined superior functionality with an elegant and highly durable housing design. This 11ac outdoor concurrent dual band access point supports a maximum throughput of 1200Mbps, up to 300Mbps on the 2.4GHz frequency band and 867Mbps on the 5GHz frequency band. OW-400-A2 utilizes 2 spatial streams, each of which can operate on the 2.4GHz or 5GHz frequency band. OW-400-A2’s high performance supports up to 100 concurrent client connections, and it’s IP67 weather-proof durable design makes it perfect for deployment in enterprise, government, public environments, and WISP application.

Introduction Guide with CenOS 5.0

Specification Sheet

CERIO’s OW-400-A2 eXtreme Power AC1200 2.4GHz/5GHz 2×2 +17dBi +Heater Outdoor Bridge/AP (800mW) is a dual band outdoor AP that combined superior functionality with an elegant and highly durable housing design. This 11ac outdoor concurrent dual band access point supports a maximum throughput of 1200Mbps, up to 300Mbps on the 2.4GHz frequency band and 867Mbps on the 5GHz frequency band. OW-400-A2 utilizes 2 spatial streams, each of which can operate on the 2.4GHz or 5GHz frequency band. OW-400-A2’s high performance and IP67 weather-proof durable design makes it perfect for deployment in enterprise, government, public environments, and WISP application..

OW-400-A2 utilizes an 800mW high power design with a built-in 17dBi 5GHz directional panel antenna and four external N-Type antenna connectors. Two of the N-Type connectors are assigned to the 2.4GHz band and two are assigned to the 5GHz band. OW-400-A2 supports both a built-in directional panel antenna or 2 N-Type external antenna connectors in the 5GHz band, however only supports N-Type connectors in the 2.4GHz band (users must enter the software UI to select either built-in antennas or external N-Type antennas for the 5GHz band, they cannot be used simultaneously). OW-400-A2’s quality hardware design incorporates a built-in heater with a smart temperature sensor. This heater automatically turns on when the PCB temperature falls below 0°C, making OW-400-A2 perfect for low temperature deployment environments. This device is powered through 802.3af/at Power over Ethernet, allowing both power and data to be provided through CAT5 cabling. OW-400-A2’s supports fast wireless roaming 802.11r/k protocol for seamless roaming and smart client handoff.

OW-400-A2 Software key Features

CenOS 5.0 combines aspects of CenOS 3.0 and CenOS 4.0 cores. Supported operation modes include Access Point Mode (including Authentication AP [AAP] Mode, Pure AP Mode, and AP with WDS Mode), Control Access Point [CAP] (Centralized AP Controller), Router AP Mode, Client Bridge + Repeater Mode, and finally WISP / CPE Repeater + AP Mode.
CenOS 5.0’s APP mode includes new features such as built-in 802.1x RADIUS authentication support. Through AAP and CAP Mode, wireless clients can be securely authenticated through a customized login page that supports OAuth2.0 credentials (Facebook Login, Google Login, etc). This opens up network access conveniently to users, while simultaneously maintaining network security and network management.

Administrators can use CenOS 5.0 CAP Mode to centrally manage AAP devices within the same network. Using CAP Mode’s Batch Setup, administrators can make setting changes such as: Wireless Settings, Security Settings / User Authentication / Firmware Upgrade / System Time / Traffic Monitoring / Status Overview and more. CAP Mode also allows users to limit client access and bandwidth to effectively load balance the network. Cerio’s innovative AAP design allows users to create customized login pages (Captive Portal) for user authentication. This not only provides a platform for marketing, but also provides a security barrier by allowing clients to use third-party credentials such as Facebook and Google to login into the network.

CenOS 5.0 core supports main operation modes : Access Point Mode with Hotspot Portal function, Control Access Point (CAP) Mode, Router AP Mode, WISP + AP Mode, and Client Bridge + Universal Repeater Mode

OW-400-A2 Software key Features

  • Operation Modes : Access Point Mode (includes Hotspot Portal Authentication, Pure AP Mode, and AP + WDS Mode), Control Access Point Mode (Centralized AP Management), Router AP Mode, Client Bridge + Repeater Mode, and WISP / CPE Repeater Mode
  • Provide customizable login and logout Captive portal page by Web Page
  • Supports built-in 802.1x RADIUS authentication server account database for small and medium environments, removing the need to set up external server and avoiding additional costs. Also supports RADIUS Server authentication server account features to fit the needs of large-scale network environments
  • Each Virtual ESSID supports 10 local built-in local accounts, And supports external RADIUS server, and OAuth2.0 Facebook / Google account
  • CenOS 5.0 Control Access Point Mode (CAP) supports centralized management of up to 128 AP devices CAP Mode Group management –maintain a set of setting templates that simplify the task of assigning the same setting to multiple APs
  • Each SSID supports 802.1q VLAN Tag standards, supporting up to 4096 group VLAN Tag capability
  • QoS(Quality of Service) for bandwidth management and traffic prioritization and supports network Users Upload/Download Bandwidth Control speed limits, and User Device (Total) bandwidth control. Administrators can regulate the maximum Bandwidth Upload/Download speed limit of each network user
  • Supports at total of 32 Multiple-ESSIDs per device (16 ESSID on 2.4Ghz and 16 ESSID on 5Ghz)
  • Supports IEEE802.11f IAPP and IEEE802.11r and IEEE802.11k Fast Roaming
  • Supports x8 WDS per Radio (2.4Ghz band WDS x8 and 5Ghz band WDSx8 ) for a total of 16 WDS Links
  • Supports Band steering technology which detects dual-band capable clients, and directs these clients to the less saturated 5Ghz network
  • Support Ping Watchdog function, which automatically monitoring device operations and reboots the device before a crash can occur
  • Software UI includes 5Ghz antenna selection of either: Built-in 5Ghz for 17dBi patch antennas or 2×2 5Ghz External N-Type Antenna Connectors
  • Software UI supports Auto reboot setting function. Software setting allows automatically reboot by Daily/Weekly/Monthly settings
  • Supports CenOS 5.0 built-in Control Access Point Mode (Controller-less Wireless LAN), in addition to future CenOS 5.0 compatible management platforms
  • Administrative Access : Supports CLI access via Telnet and SSH
  • Provides Traffic Monitor and Graphical GUI Status Interface for Network and Radio Overview

OW-400-A2 CenOS 5.0 Software Specifications

Support Wireless Access Controller

CERIO CenOS 5.0 Access Point provides authentication and authorization for a wireless networks. Administrator can select CAP (Control Access Point) mode to centralize management of network APs

(CAP) Control Access Point Mode – Centralized AP Management

  • AP Group management –maintain a set of setting templates that simplify the task to assign the same setting to multiple APs
  • AP-Automatic configuration and provisioning by CAP mode
  • Locally maintained configuration profiles for managed APs
  • Auto discovery managed APs in AAP Mode
  • Centralized firmware Upgrade-Select multiple APs and upgrade their firmware at the same time
  • Remote Firmware upgrade by TFTP and HTTP.

Managed APs Monitoring

  • Monitor APs for traffic and system information
  • Track the number of associated clients to the APs
  • Supports Location Map Management

(AAP) Authentication Access Point Mode – Customized Captive Portal Login

Service provider can benefit from the flexible web redirection service. This service provides a set of location, browser, and user-specific information to the backend system to enable value added personalized service provided by the WISP. Detailed location information is available via HTTPs/XML interfaces. Web pages can be either stored locally on the OS or remotely on a guest portal server.

AuthorizationAuthorization:
access control to network resource such as protected network with intranet, Internet, and bandwidth

Web Authentication

  • Authentication: single sign-on (SSO) client with authentication integrated into the built-in 802.1x RADIUS authentication server account database and local authentication environment through local, RADIUS Server and OAuth2.0
  • Support internet bandwidth control and restricts the number of guests
  • Allow MAC binding IP address for local users authentication
  • Support Web-based for SSL browser-based authentication
  • Default support OAuth2.0 through Google and Facebook account authentication

Wireless Feature

  • Wireless Dual-Band capabilities, operating in both 2.4Ghz and 5Ghz band frequencies
  • 2.4Ghz band supports standard 802.11 bgn protocol with maximum data transfer rate of 300Mbps
  • 5Ghz band supports 802.11 an/ac wireless protocol with a maximum data transfer rate of 867Mbps
  • Transmission power control :  Layer 1~9
  • Channel Bandwidth setting : 20MHz, 20/40MHz, or 80MHz
  • HT Tx/Rx Stream selection : 1 or 2
  • Supports packet transmission time control through Slot Time and ACK Timeout interval control functions
  • Supports Beacon Interval and performance control DTIM Interval for client power efficiency

Authentication/Encryption (Wireless Security)

  • SSID Visibility support to display or hide ESSIDs, and VLAN assignment on ESSID
  • Supports IEEE802.1x authentication (EAP-MD5 / TLS /TTLs)
  • WEP 64/128 bit /EAP-TLS + Dynamic WEP , EAP-TTLS + Dynamic WEP, PEAP/MSPEAP + Dynamic WEP
  • Supports security protocol IEEE 802.11i Preauth (PMKSA Cache )
  • WPA-PSK/TKIP,WPA-802.1x/TKIP, 802.11i WPA2-PSK/CCMP/AES 128/256bit,WPA2 (802.1x /CCMP / AES 128/256bit), No. of registered RADIUS servers: 1
  • Setting for TKIP/CCMP/AES 128/256bit (ASCII 63 & HEX 64 )key’s refreshing period
  • ESSID supports VLAN Tag function, each group can use different virtual ESSID tag for organized traffic
  • Access Control list (ACL) by MAC Address
  • Client Isolation and Client Connection limitations.

Quality of Service

  • Download and Upload traffic control and support Traffic Analysis and Statistics
  • Support IEEE802.11e WMM
  • DiffServ/TOS , COS, IEEE 802.1Q Tag VLAN priority control

Network / Management

  • Provide customizable login and logout Captive portal page by Web Page
  • Supports IEEE.802.1Q VLAN Tag
  • Supports IEEE802.1d Spanning Tree Protocol
  • Router/WISP supports DHCP server function to automatically give IP addresses to end client
  • Router/WISP supports fixed IP for DHCP clients and PPPoE dial-up link to the WAN wifi network
  • Router/WISP supports PPPoE Reconnect, conveniently connecting clients to the DHCP server
  • Supports Proxy DNS, Dynamic DNS, and NTP Client
  • Web-Based management interface, Intuitive Web Management Interface, Administrative Access : HTTP and HTTPS and support CLI access via Telnet and SSH
  • Support remote Firmware Upgrade via Web , Reset to Factory Defaults
  • Support SNMP v1/v2c/v3 , MIB II. Also supports SNMP Traps to a list of IP addresses
  • Supports Ping Watchdog to detect crashes after consecutive failed pings
  • Support System log Setup to remote server

Status Monitoring

  • Status monitoring of on-line users and authentication users
  • Real-Time Online Users Traffic Statistic Reporting and users connection status
  • Support Syslog for diagnosing and troubleshooting
  • User traffic history logging

OW-400-A2 Hardware Key Features

  • 2.4GHz Data Rate of up to 300Mbps(Tx), 300Mbps(Rx) link rate
  • 5GHz Data Rate of up to 867Gbps for 80MHz channel bandwidth
  • 800mW at 2.4GHz and 500mW at 5GHz Output eXtreme High Power design
  • Built in +17dBi , 5GHz (H16, E16) Directional Panel Antenna
  • External for 2.4GHz 2×2 and 5GHz 2×2 N-Type Connector design (IEEE 802.11ac and 11nbg 2Tx/2Rx Design)
  • IEEE 802.3af/at Power over Ethernet (48V) support
  • Supports PoE Bridge function to allow power to be passed on to subsequent 802.3af PoE devices
  • Built-in heater with temperature sensor
  • Integrates a long-range power amplifier and high sensitivity receiver to deliver unmatched reliability and performance at large coverage application
  • Weather-proof Housing (IP67 Approved)
  • Built-in lightning arrester (15kV ESD)
  • Supports Hardware chipset base Watch Time Dog, allowing the OS to reboot automatically before a crash

OW-400-A2 Hardware Overview

  • Includes two Gigabit Ethernet Ports(ETH1 and ETH2)
  • LED Panel (6 LED Lights) for Status Indication
  • 4 N-Type Connectors for external antenna connection (2 for 2.4GHz and 2 for 5GHz)
  • 4 Holes for Mounting Bracket
  • Includes Reset Button in ETH Port
  • Automatically adjustable Vent design
* Vents keep the worst from happening. They allow enclosures and containers to breathe,
equalizing pressure and reducing condensation while filtering out liquids and other
contaminants. The result: greater product performance, increased durability, higher reliability
and peace of mind.

CERIO’s OW-400-A2’s efficient hardware and 5GHz main CPU chip can sustain a maximum of 100 simultaneous client connections when utilizing both 2.4GHz and 5GHz frequencies (dual band). The client connection limit may fluctuate based on environmental factors. Ideal deployment environments for OW-400-A2 include enterprise, university campuses, government projects, public venues, and WISP application. The hardware also includes a built-in lightning arrester (15kV ESD) design and Heater control, and built-in heater is designed to automatically turn on once PCB temperatures drop below 0°C, making OW-400-A2 the perfect device for cold weather deployment.OW-400-A2 Hardware Application

CERIO’s product design of OW-400-A2’s PoE power hardware makes the device extremely suitable for outdoor environment architectures. The simplicity of powering OW-400-A2 and other 802.3af / at PoE standard devices enables ease of deployment and management.

PoE Bridge application

CERIO’s product design of OW-400-A2 PoE power hardware makes the device extremely suitable for medium-sized multi-PoE AP environment architectures. The simplicity of powering OW-400-A2 and other 802.3af PoE standard devices enables ease of deployment and management. OW-400-A2’s PoE Bridge function easily provides power to additional PoE devices such as AP and IP Cameras, allowing for simple structure of a network environment.

Use Mounting Bracket Easy Pole Mount and Wall Mount Installation

CERIO’s OW-400-A2’s supports both Pole and Wall Mounting. Using the provided mounting bracket, users can deploy OW-400-A2 in a wide range of outdoor environments.

Pole Mount

Wall Mount

OW-400-A2 Dimensions (mm)

Application Software
OS System Compatible edition Cerio CenOS 5.0 Software Core
Specificatios
Network Standards Conformance IEEE 802.11 b/g/n/ac compliant
  IEEE 802.3 / IEEE 802.3u
IEEE 802.11 b/g/n compliant
IEEE802.3af/at Power Over Ethernet compliant
IEEE 802.11Q VLAN
IEEE802.11r/IEEE802.11k Fast Roaming
IEEE802.11e WMM
Ethernet Configuration 10/100/1000BASE-TX Auto MDI/MDI-X Ethernet Connector x 2
(Power over Ethernet 802.3.af/at PoE in )
LED Indicators PWR  (Power)  LED x 1
ETH1  (PoE In)  LED x 1
ETH2  (PoE Bridge)  LED x 1
Heater LED x1
Signal LED x2
Wireless Specifications
Data Transfer Rate IEEE802.11b : 1 / 2 / 5.5 / 11Mbps (auto sensing)
IEEE801.11g : 6/ 9/ 12/ 18/ 24/ 36/ 48/ 54Mbps (auto sensing)
IEEE802.11n: 300Mbps (at 40MHz), 150Mbps (at 20MHz)
IEEE802.11ac:, 867Mbps (at 80MHz) 400Mbps (at 40MHz)
Frequency Range IEEE802.11nbg :
2.412 ~ 2.462GHz (USA)
2.412 ~ 2.484GHz (Japan)
2.412 ~ 2.472GHz (Europe ETSI)
2.457 ~ 2.462 GHz (Spain)
2.457 ~ 2.472 GHz (France)
IEEE802.11a/an/11ac  :
5.150 – 5.350 & 5.725 – 5.825 GHz (USA)
4.900 – 5.250 GHz (Japan)
5.150 – 5.350 & 5.470 – 5.725GHz (Europe ETSI)
Channel Spacing IEEE802.11b/g/n : 20/40MHz
IEEE802.11ac: 20/40/80MHz
Media Access Protocol CSMA / CA with ACK
Modulation Method IEEE802.11b:DSSS (DBPK,DQPSK,CCK)
IEEE802.11a/g/n:OFDM (64-QAM,16-QAM,QPSK,BPSK)
IEEE802.11ac : OFDM (256-QAM, 64,-QAM, 16-QAM, QPSK,BPSK)
Operating Channels 802.11b/g/n : 11 for FCC,14 for Japan,13 for Europe, 2 for Spain, 4 for France
IEEE 802.11an/ac  @ 5GHz :
US : 12 (CH: 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161)
Japan : 4 (CH: 34, 38, 42, 46)
ETSI : 19 (CH: 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140)
Transmit Power Variation 2.4GHz :  Max : 29 ± 1 dBm    5GHz :  Max : 27 ± 1 dBm
Receiver Sensitivity 2.4GHz :  Max : -92 dBm    5GHz :  Max : -92 dBm
Environmental & Mechanical Characteristics
Operating Temperature -20 °C ~ 50 °C
Storage Temperature -20 °C ~ 60°C
Operating Humidity 10% – 80% Non-Condensing
Storage Humidity 5% – 90% Non-Condensing
Antenna 17dBi 5GHz Dual Polarization Directional Antenna  ( H : 16 , E : 16)
4 N-Type Connectors for external antennas
Vent Comply with UL 60950-22 outdoor product , automatically adjustable Vent design
Form Factor Supports both Pole Mounting installed using a provided Mounting Bracket.   With IP67 Rating
System Power Consumption 24Watt (Max)
Power Supply Supports Power Over Ethernet ( POE 48~57V voltage)
Integragted IEEE 802.3af /at Power over Ethernet (PoE)
Input Power IEEE802.3at 48V~57V PoE In
Dimensions ( W x H x D ) 255 x 225 x 78 mm
Unit Weight 1.8kg
Certifications ROHS compliant ,FCC and CE applying

 

Package Content
OW-400-A2 Main Unit x1
PoE Power Supply Kit x1
Wall/Pole Mounting Bracket x1
Grounding Cable x1
CD Manual x1
Quick Installation Guide x1
Warranty Card x1

Specification

Version Published Date Language File Size Download
v2.0a 2016.08.11 English 946KB

 

QIG Download

Version Published Date Language File Size Download
v1.0a 2016.07.22 English 490KB

 

QSG Download

Version Published Date Language File Size Download
v1.0a 2016.07.22 English 1.42MB

 

User Manual

Version Published Date Language File Size Download
CenOS5.0 v1.0a 2016.07.22 English 4.53MB

 

Introduction Guide Download

Version Published Date Language File Size Download
Product 2016.08.10 English 4.07MB
 

Reference Document Download

Description Published Date Language File Size Download
WiFi RF Connect Type List 2014.12.02 English 452KB

 

Firmware Download

Version Published Date Language File Size Download
CenOS5.0 / V1.1.10 2017.10.23 English / Chines 10.1MB

Notes:

1. To prevent data loss during firmware upgrade, please back up current settings before proceeding

2. Do not interrupt during firmware upgrade including power on/off as this may damage system.

3. For better firmware upgrade reliability, use a direct ethernet connection instead of Wi-Fi.

Did you find apk for android? You can find new Free Android Games and apps.