POE-PE03GE-24W

PoE Series – 10/100/1000M Gigabit with ESD Ground PoE Adapter bundle 24Watt Power Adapter Set

The POE-PE03GE-24W Gigabit with ESD Protection PoE Adapter bundle 48VDC 24Watt Power supply is suitable for use with products that basically does support Power Over Ethernet and ESD ground cable . Support Over load current protection for the board and build in lightning arrester (7KV ESD) design Simply connect the power source to the Adapter, and then use an Gigabit Ethernet cable to connect the Adapter to the device.

The POE-PE03GE-24W Gigabit with ESD Protection PoE Adapter bundle 48VDC 24Watt Power supply is suitable for use with products that basically does support Power Over Ethernet and ESD ground cable . Support Over load current protection for the board and build in lightning arrester (7KV ESD) design . Simply connect the power source to the Adapter, and then use an Gigabit Ethernet cable to connect the Adapter to the device.

Higlight Features

  • Compliant with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, and IEEE802.3ab 1000Base-T Ethernet standards
  • Supports PoE Powered Device (PD ) classification identify in accordance with Class 3 PoE 15.4Watt Power Levels
  • Bundles 48V/0.5A Power supply for maximum power capacity of 24Watts
  • Supports PoE Powered Device (PD ) classification identify.
  • Overload Current Protection with built-in lightning arrester (7KV ESD)
  • Supports LED Diagnostic LED

Long Distance Application

Cerio POE Injector can provide both data and power for distances of up to 100 meters (328 feet) from the power source when using CAT 5 or up cabling.

Functionality

The POE-PE03GE-24W  It’s a cost effective solution for deploying Gigabit PoE Wireless Access Points or PoE IP Surveillance or PoE IP Phone in indoor or outdoor environments where the power source is not readily available or power cables are not permitted. In Gigabit Ethernet, four pairs of Cat5 or Cat5E twisted pairs are used as the medium for transmission.  The actual data transmission only takes up two pairs of wires (pairs 1-2 and 3-6). The PoE technology utilizes the remaining pairs (pairs 4-5 and 7-8) to conduct electricity. The output power will be dependent on the power rating of the power supply that one chooses to use.  This helps to reduce number of wires that lead up to tower and others.

Additional Benefits

Some additional benefits of Cerio POE Injector include cost saving, convenience in network planning, and higher reliability.

Easy installation

Plug-and-Play, requires no configuration.

 

POE-PE03GE Application

 

POE-PE03GE Units Combination

 

POE-PE03GE-24W Hardware Overview

 

Standards & Hardware Specifications
Standard Simple Gigabit POE Adapter w/LED
Network Media  10BASE –T: UTP Cat. 3 or up
Environmental & Mechanical Characteristics
Max PoE Powe 24Watts per port
Power Connector(Interface) DC-Jack
ESD Protection Design ESD 7KV External Grounding Cable (140mm/20AWG)
Power Requirement External power adapter :48V DC/0.5A power supply for maximum output of 24Watts
LED Power on x1
Operating Temperature 0° to 40° C
Storage Temperature 0° to 50° C
Storage Humidity 5% to 90% non-condensing
Dimension ( W x H x D ) 41mm*54mm*23mm
Weight ( g ) 30g
Form Factor Wall mounting / Units Combination
Case of material ABS 94V-0
Certifications RoHs compatible 100BASE-TX : UTP Cat. 5 or up
1000BASE : UTP Cat. 5 or up
Data Transfer Rate 10/100/1000Mbps (Half-duplex), 20/200/2000Mbps (Full-duplex)
PoE Type Midspan / B Type (PIN 4/5 & 7/8)
Data PIN PIN 1/2 & 3/6 , 4/5 & 7/8
Power PIN PIN 4/5+ & 7/8 (Power + Data Pin)
Package Content
POE- PE03GE   Main Unit x1
Power supply x1
Warranty Card x1