CS-1005G-2PD

5Port 10/100/1000M AT Extender/Power failover
Gigabit Switch with 2 Port PoE+

The CERIO CS-1005G-2PD is a powerful and supports IEEE 802.3af/at standard provides DC 48~57V Gigabit over Ethernet cables high-performance Gigabit Extender switch. It powered by PoE power source such as PoE switch or PoE injector. It also has the ability to passthrough PoE power further downstream to one or two Powered Devices (PD devices) and the PoE budget is dependent on the PoE source (802.3af or 802.3at) and the PD’s PoE Classification. It is ideal to extend the Ethernet network range beyond 100m, delivering both data and power to network devices such as IP CAM、VOIP Phone with IEEE PoE and Data standardsMoreover, The CERIO CS-1005G-2PD supports dual power receiving mode for PoE (PD ) In and DC In. User can select either one to supply power or it can choice dual power supply as power backup function for the device. (Power failover).

The CS-1005G-PD supports 5 ports 10/100/1000Mbps auto-negotiation function. It provides an easy way to migrate Gigabit network without pain. By integrating both data transmitting cable and power supply, the hassle of constructing your network can be eliminated,allowing you to easily connect your wired LAN network. It is ideal for micro-segmenting large networks into smaller networks, connecting subnets for improved performance, and enabling the bandwidth demanded for multimedia and imaging applications. Over current protection and circuit shorting protection are also supported to ensure the safety.

Highlight Features
• Complying with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, IEEE 802.3af PoE ,IEEE 802.3at PoE+
• 5 Ports 10/100/1000Mbps Auto-Negotiation Gigabit Switch, including 1 Port PoE(PD) + 2 Ports PoE(PSE) Extension function, complying with IEEE 802.3af/at standard
• Supporting the power up to 30Watt/15.4Watt/7.5Watt/4Watt for eachPoE( PSE)ports(Only Port1&2)
• Supports dual power receiving mode PoE (PD) In and DC In. It supports power backup (Power Failover) function when use dual power supply
• Full/Half-Duplex capability on each TX port
• Supports Store & Forward architecture and performs forwarding and filtering
• Auto-learning networking configurations
• Supporting the flow control: back pressure for Halfduplex and IEEE 802.3x for Full-duplex mode
• Broadcast storm control and supporting store & forward operation
• Support Jumbo Frame 9K
• Non-blocking & Non-head-of-line blocking full-wire speed forwarding
• Supports TP interface Auto MDIX function for auto TX/RX swap
• Automatic Source MAC Address Learning and Aging
• Supports up to 2K MAC addresses
• Up to 1Mb bits buffer

PoE Extender Appliction

Power Failover Appliction

Data Extender Appliction

Hardware Overview

Standards & Hardware Specifications
Network Standards Conformance IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX,
IEEE 802.3ab 1000Base-T,
IEEE 802.3x Flow Control
IEEE 802.3af Power over Ethernet (PoE)
IEEE 802.3at Power over Ethernet Plus (PoE+)
Port Configuration 5ports RJ-45 connectors for 10/100/1000Mbps
(With 1 Port Gigabit PD & 2 Ports PSE/ PoE+ function )
Media Access Protocol CSMA / CD
Network Media 10BASE –T: UTP Cat. 3 or up,
100BASE-TX: UTP Cat. 5 or up,
1000BASE-T: UTP Cat. 5 or up
Transmission Method Store and Forward
MAC Address Table 2K
Built-in Buffer 1Mb
Jumbo Frame 9K
Data Transfer Rate 10/100/1000Mbps (Half-duplex),
20/200/2000Mbps  (Full-duplex)
Auto MDI/MDIX Yes
LED Indicators Per Gigabit Port:(Link/Act): Status x 5
PoE : Status x 2
Per Unit: Power x 1
Internal Bus Speed 10Gbps
Environmental & Mechanical Characteristics
Power Supply Type 1 : PoE PD Receiving Max.30Watt ( 802.3af/at)
Type 2 : DC Power Adapter : External 30Watt Power
Power Consumption 1.5 Watt
PoE Power Output Up to 30W per port (for Ports 1-2 Only )
Power Requirement DC Input : Voltage: 48 ~ 57Volt
POE Input : Power over Ethernet IEEE 802.3af/at
standard
Operating Temperature 0° to 55° C
Storage Temperature -40° to 70° C
Operating Humidity 10% to 90% non-condensing
Storage Humidity 5% to 90% non-condensing
Dimensions ( W x H x D ) 160 x 85 x 25mm
Unit Weight 0.342kg
Case of Materials Metal
Certifications FCC, CE, RoHS-Compliant
Package Contents
CS-1005G-2PD Main Unit x1
Quick Installation Guide Booklet x1
Power Adapter x1
Warranty Card x1