All for Joomla All for Webmasters
Want create site? With Free visual composer you can do it easy.

SP-800-PRINTER

CenOS Account Ticket Generator POS System

CenOS Account Ticket Generator kits is designed with two COM ports for redundancy where two Line Thermal Printers can be attached at the same time. for ease of use account generation via Network Control Server from the built-in On-Demand billing plan from CERIO CenOS Access Controller and then prints the account ticket via Thermal Printer.

Specification Sheet

CERIO CenOS Account Ticket Generator kits containing a Thermal Printer and Network Control Server provides instant ticketing for users, and comes with two COM ports for redundancy where two Line Thermal Printers can be attached at the same time. CenOS Account Ticket Generator kits is designed for ease of use account generation via Network Control Server from the built-in On-Demand billing plan from CERIO CenOS Access Controller and then prints the account ticket via Thermal Printer for wireless Internet access in public locations ranging from places such as airports, hotels, conventions, and coffee shops, Hotspot application.

 

The SP-800-PRINTER is easy to install and setup, allowing the Line Thermal Printer to connects directly to the Network Control Server with serial port (RS-232) COM1 and COM2 (for redundancy) and standard TCP/IP(RJ45) interface to connect to CERIO CenOS Access Controller . It is simple to operate with just a few clicks needed on the Network Control Server and out comes the ticket from the Line Thermal Printer.

Highlight Features

Network Control Server:

  • 10/100 Mbps Fast Ethernet full duplex auto negotiation
  • Two DB9 RS-232 Console supported
  • ( 0~9 display ), 10 segment LED display
  • 6 matrix function keys
  • Ethernet activity, Power LED’s
  • Monitor, manage and control industrial field devices remotely
  • Support TCP Server/ Client link mode
  • DHCP, BOOTP, Static IP, and ARP supported
  • Built-in Web server for configuration
  • Support 12~60VDC Wide Voltage and Over Voltage Protection
  • Support overload current and reverse polarity protection and One removable 2-contact terminal Block
  • On Desktop & Wall Mountable Form Factor
  • Wall-mount Rugged metal case with IP50 compliance for industrial usage

QR Code Thermal Line Receipt Printer:

  • Halt-on protect for over heat 60 °C
  • Interface for Serial available
  • Use ESC / POS printer commands set
  • Drop and print paper installation for user friendly
  • Simple paper jam elimination
  • Print Head 50Km Life Support
  • LED Indicators support Power, Error, Paper

Network Control Server :
Hardware Specifications
Indicators (LED)  Power
10/100Base-TX connection
Link Status
Keypad Status
( 0~9 display ), 10 segment LED display
Keypad 6 matrix function keys
Hardware Power Switch  On / Off 
Serial & Network Interface
Serial Port  DB-9-DTE(male) * 2
Data Rates COM1 : 1200  to  921600 bps 
COM2 : 9600 bps
Characters  5, 6, 7, 8  data bits
Parity / Stop Bits Odd , Even, None /
1  or  1.5
Flow Control XON/ XOFF (Software), RTS/ CTS (Hardware), None
Network Interface Ethernet 10/100M (Auto-Sensing) RJ45 * 1
Link Mode TCP Server/Client
Protocols TCP, UDP, ICMP, IPv4, DHCP, BOOTP, ARP, DNS, ICMP, Telnet, DHCP, HTTP
Environmental & Mechanical Characteristics
Isolation Serial : Transient protection for data lines (TX and RX) to ±15KV(air),±8KV(contact)
  RJ45: Transient protection for data lines (TX and RX) to ±15KV(air),±8KV(contact)
  Power Input : 1500W peak pulse power capability 
  with 10/1000 us waveform repetitive rate (duty cycle) : 0.01% ; Uni and Bidirectional
Power Consumption 1.68W Max
Operating Temperature 0 °C ~ 60 °C
Storage Temperature 0 °C ~ 70 °C
Operating Humidity 10% to 80% Non-Condensing
Storage Humidity 5% to 90% Non-Condensing
Power Supply DC Jack : 110 – 220V AC Power ; 12 VDC input. 
Screw Terminal Block :  12-60 VDC
Weight 282g
Dimensions ( W x H x D ) 9 x 2.5 x 11 mm
Material IP50 Metal enclosure
Form Factor Desktop & Wall Mount
Certification FCC,CE, IP50、ROHS compliant
Thermal Line Receipt Printer :
Hardware Specifications
Print Speed 52mm/sec (14 lines/sec
Print Life 50km
Interface Serial D-Sub 25 pin female connector, 9600 bps baud-rate, none parity, 8 data bits and 1 stop bit, supports RTS/CTS & XON/XOFF protocol
Hardware Button Feed: to feed roll paper
Print Font ASCII : 12 x 24 dots, 1.25mm(W) x 3.00mm(H)
Graphic : 24 x 24 dots, 3.00mm(W) x 3.00mm(H)
Print Resolution 384 dots/line or 8 dots/mm
Effective Print Width 48mm
Paper Width 57.5mm± 0.5mm
Paper Roll Diameter 50mm
Paper End Detection Yes
Indicators (LED) Power: shows power on/off status Error: indicate the printer error Paper: indicate out of paper or printer cover is not close properly
Environmental & Mechanical Characteristics
Operating Temperature 0 °C ~ 50 °C
Storage Temperature -10 °C ~ 55 °C
Operating Humidity 10% to 90% Non-Condensing
Storage Humidity 10% to 90% Non-Condensing
Power Supply DC Jack : 100 – 240VAC Power ; 8 ~9 VDC /3A input.
Weight 765g
Dimensions (W x H x D) 112 x 91 x 185 mm
Certification FCC, CE, ROHS compliant
Package Contents
Network Control Server :  
Main Unit x1
Power Adapter x1
Quick Installation Guide x1
Warranty Card x1
 
Thermal Line Receipt Printer :  
Main Unit x1
Power Adapter x1
D-Sub 25 to D-Sub 9pin RS232 Cable x1
Thermal Paper x1

 Specification

Version Published Date Language File Size Download
v1.0EK 2016.11.15 English 582KB

QIG Download

Version Published Date Language File Size Download
v1.0a 2015.03.25 English 1.27MB
Did you find apk for android? You can find new Free Android Games and apps.