POE-PC04S News

Convert standard 802.3af/at active PoE source to the
proprietary passive PoE for convenience network planning

This POE-PC04S can convert the standard 802.3af/at active PoE source to the proprietary passive PoE (power pin 4,5/7,8), in addition it can switchable the volt output to 12V/19V/24V by DIP switch. When there had a standard active PoE switch (802.3af/at) in the network architecture, but the PoE device (PD) is Passive PoE type, then you can use POE-PC04S to convert the PoE power form standard active PoE to proprietary passive PoE , it is very convenient and cost effective solution. It is perfect for transforming access points that use a passive PoE design into 802.3at compliant devices. Other applications also include deploying proprietary passive PoE IP cameras with standard 802.3af/at active PoE switches.

☆ Complying with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX,IEEE802.3ab 1000Base-T, IEEE-802.3at PoE+ / 802.3af PoE

☆ Supports 10/100/1000Mbps Gigabit Ethernet

☆ With hardware protection design the device will not cause any damage while changing the voltage output during operation

☆ Supports Output Voltage hot switching for 12VDC/19VDC/24VDC three range adjustable

☆ PoE (PD) support IEEE 802.3at active PoE+, IEEE 802.3af PoE, Max power input support 30Watt

☆ Up to 100 meters (328 feet) application and supports to Short-circuit Protection

☆ LED indicators for Power function enable and DC output voltage display of 12V/19V/24V